LOGICPRESS SET

85,00 

LOGICPRESS SET is an automatic pump control, which starts and stops the pump ‘on demand’.

When a valve or tap is opened on the outlet side of the control, the LOGICPRESS SET senses the drop in pressure and instantly starts the pump when the pressure drops below 1,5 – 2,0 or 2,2 bar. When the valve is closed the pump continues to run for a further 10 seconds to prevent water hammer, and then stops ready for the next demand for water.

If the pump runs out of water during operation, the LOGICPRESS SET will automatically shut down the pump to prevent damage from dry running. The control is then automatically or manually re-set once the water source is restored.

11 in stock (can be backordered)

SKU: PFLP20125 Categories: ,

Description

Brand: TREVI
Product Code: LOGIPRESS SET
Availability: In Stock

When the pumps has not worked within 24 hours, than the pump will run for 5 seconds to prevent block of the pump, mechanical seal etc.

Specifications

  • Auto stop/start
  • Dry run protection
  • Can be installed only in vertical position
  • Manual or automatic re-start after dry run shut down
  • Adjustable starting pressure :1.5 – 2.0 – 2.5 bar
  • No water hammer
  • Simple installation
  • Max fluid temperature 65ºC
  • Max pump size 1.5kW
  • Protection IP65
  • Internal flow valve is stainless steel instead of brass

Model: LP 1″ 115/230V
Voltage: 115-220 V
Power: 1.5 kW
Current: 16
Inlet:1″
Outlet:1″
Max. Flow: 200 l/min
SKU: PFLP20125

Additional information

Weight 2 kg
Dimensions 20 × 20 × 25 cm