PRESFLO

60,00 

PRESFLO is an automatic pump control, which starts and stops the pump ‘on demand’.

When a valve or tap is opened on the outlet side of the control, the PRESFLO senses the drop in pressure and instantly starts the pump when the pressure drops below 1.5 bar or 2,2 bar. When the valve is closed the pump continues to run for a further 10 seconds to prevent water hammer, and then stops ready for the next demand for water.

If the pump runs out of water during operation, the PRESFLOl will automatically shut down the pump to prevent damage from dry running. The control is then automatically or manually re-set once the water source is restored.

Description

Brand: DGFLOW
Product Code: PRESFLO
Availability: In Stock

The special patent pending valve guarantees that the pump runs continuously even with flow rates as low as 1-2 l/min, and permits PRESFLO to be installed in any position

Specifications

  • Auto stop/start
  • Dry run protection
  • Can be installed vertically and horizontally
  • Manual or automatic re-start after dry run shut down
  • Fixed start pressure 1.5 bar (blue end cap) or 2.2 bar (red end cap)depending of model
  • No water hammer
  • Simple installation
  • Max fluid temperature 65ºC
  • Max pump size 1.5kW
  • Protection IP65

Models In Stock

Model: PF1015
Voltage: 220 V
Power: 0.75 kW
Current: 10 Amp.
Without pressure gauge
Inlet:1″
Outlet:1″
Max. Flow: 200 l/min
SKU: V00101101

Model: PF1022P
Voltage: 220 V
Power: 0.75 kW
Current: 10 Amp.
With pressure gauge
Inlet:1″
Outlet:1″
Max. Flow: 200 l/min
SKU: V00101403

Additional information

Weight 2 kg
Dimensions 23 × 18 × 19 cm
Model

PF1015, PF1022P