PRESET is an automatic pump control, which starts and stops the pump ‘on demand’.
When a valve or tap is opened on the outlet side of the control, the PRESET senses the drop in pressure and instantly starts the pump when the pressure drops below the pre-setted starting pressure from 1 bar till 5 bar. When the valve is closed the pump stops to run at the cut off pressure. If the pump runs out of water during operation, the PRESET will automatically shut down the pump to prevent damage from dry running. The control is then automatically or manually re-set once the water source is restored.

1 in stock

SKU: D01131001 Categories: , ,


Product Code: PRESET
Availability: In Stock

The great advantage that this PRESET is equiped with a digital display.

Its a must to use an expansion tank with membrane. Capacity is in function of the flow & setting of pressure values of the pump. Minimum 25 liter !!

The special patent pending valve guarantees that the pump runs continuously even with flow rates as low as 1-2 l/min, and permits PRESET to be installed in any position


  • Auto stop/start
  • Dry run protection
  • Can be installed vertically and horizontally
  • Manual or automatic re-start after dry run shut down
  • Fixed start pressure from 1 to 5 bar
  • No water hammer
  • Simple installation
  • Max fluid temperature 65ºC
  • Max pump size 1.5kW
  • Protection IP65

Voltage: 220 V
Power: 1.5 kW
Current: 16
Max. Flow: 200 l/min
SKU: D01131001
Price ex-VAT: 120.00€

Additional information

Weight 1,8 kg
Dimensions 23 × 18 × 19 cm